Pacemaker Drop Sealers

Each Pacemaker Packaging drop sealer comes standard with a trim wire and scrap blow off. As the operator loads the product through the entering guide arms it drops it into the gravity slide sealer section of the machine. Holding pins stop the package’s downward travel. A trip microswitch or an electric eye sensor (optional) signals the sealer jaw to close. The seal wire is energized, effectively sealing the bag opening and trimming the excess bag scrap. A kicker plate severs the excess material above the seal, which is blown away by a short blast of compressed air. As the sealer jaw opens, the holding pins retract. The finished package slides down off the slide rack. The holding pins return, ready for the next package.

An optional incline takeaway conveyor can send your package down the assembly line for further production or loading. Also available is the Pacemaker Bag Loader for ease in bag packaging.

All product contact parts are stainless steel making it suitable for a wide variety of applications. Options available for the Pacemaker Drop Sealer include double line seal (separate flat ribbon seal wire and heated trim wire), product compression attachment (for flattening the product & bag before sealing), electric eye product sensors, casters for machine moveability, extra daylight (wider jaw opening for larger products).

NOTE: Equipment requires at least 80 PSI compressed air line in plant. If a separate compressor is used, a 3 CFM tank is required. Air must be clean and dry. Uses 110volt, 60 hz, 1-phase electrical.